Shoei NXR - Specification

What is required from the performance of a helmet for sports riding?  In addition to safety, aerodynamics, clear vision, a ventilation system which truly performs as well as compact and light motion performance are required. The NXR from SHOEI is the new pure sports full-face helmet for the modern rider who demands a world-class sports performance.

Compact Design

• The NXR boasts a newly designed shell - smaller in size, this new slim and light shape is realised through the use of a redesigned shell baseline on both sides.
• Effective ventilation Performance
• Three straight hole intakes in forehead  - 4 outlets located inside parts realize air exhaustion that is improved upon from the XR-1100.
• Quietness
• The reduction of wind noise has been improved by restraining the cause of noise. This has been achieved by the improvement of wind beading and utilising larger cheek and ear pads.
• Visor System
• The NXR utilises a completely new visor and base plate system. While Shoei's world-renowned design for hassle free fitting and removing of  the visor is maintained, the base plate can be adjusted front and rear by rotating a dial.
• Shell/Liner Sizes
• 7 Sizes from XXS to XXL
• Moisture Absorption Quick Dry Interior Fabric
• Advanced fabric with high moisture absorption and quick drying properties is used throughout all interiors.
• Pinlock Fog-free Lens
• The NXR comes supplied with Pinlock Fog-Free lens.
• LAST ONE LARGE ONLY

TO CLEAR SPECIAL OFFER LAST TWO Shoei Hornet Dual sport gloss black size XS only. Reduced to £199.99 from £350.00

• AIM multi composite fibre construction
• Mist resistant CNS-1 Pinlock system
• Double D-Ring
• Emergency quick release system
• Anti fog, anti scratch inner sun visor
• Detachable and washable centre pad and cheek pads
• Noise reducing ear pads
• Prepared for intercom installation
• Multiple venting and extraction
• Inlet vents on the brow and chin
• Exhaust vents at rear of helmet
• Integrated rear spoiler

• Newly designed cheek pad including Noise Isolator: Deflector prevents wind ingress, maximum noise reduction, optimum wearing comfort
• Prepared for SENA communication system: Perfectly integrated into the helmet, no protruding operating unit
• Compact Helmet Shell : 3 Different outer shell constructions, ultra lightweight by innovative shell moulding technology, wind tunnel developed for perfect aerodynamics
• Improved flip up Mechanism: Innovative two-stage locking system in opened state allows P/J double homologation, Stainless steel pivot locking system
• Optmized visor form: Completely new design, specially shaped for optimum sealing, minimized optical distortions
• Shell in AIM: Ogranic and multi-composite fibres in various layers for a shock-absorbent shell with optimum rigidity. 
• EPS liner system with two densities: Optimized protection through EPS elements with different shock absorbing levels
• Mist-retardant CNS-3 Pinlock system: Fast and easy to change
• Stainless steel micro Ratchet system: Easy to use and always perfectly adjusted
• 360 Degree stainless steel Pivot locking system: For safe locking of the face cover
• Double homologation P/J: Homologated as Jet and Integral helmet
• QSV-1 Sun Visor: DIN EN1836 approved
• 3D detachable and washable Cheek pads and Centre pad: For better care and individual adjustment
• Detachable and washable Chinstrap cover: For ease of cleaning
• Prepared for SENA communication system installation: Developed by SENA and specifically designed for Neotec II, distributed and marketed by SENA exclusively
• Multiple venting and extraction: For optimum ventilation performance
• Inlets at upper head and chin areas: Provide maximum ventilation performance
• 2 Outlets at the rear: To Extract warm air
• Dramatically increased airflow: Through newly developed air intakes
• Integrated Spoiler: For optimized aero dynamical performance
• Integrated Vortex-Generator: Active noise cancelling 
• Newly designed chin spoiler (Aero deflector): Relaxed ride through less turbulences

• Newly designed cheek pad including Noise Isolator: Deflector prevents wind ingress, maximum noise reduction, optimum wearing comfort
• Prepared for SENA communication system: Perfectly integrated into the helmet, no protruding operating unit
• Compact Helmet Shell : 3 Different outer shell constructions, ultra lightweight by innovative shell moulding technology, wind tunnel developed for perfect aerodynamics
• Improved flip up Mechanism: Innovative two-stage locking system in opened state allows P/J double homologation, Stainless steel pivot locking system
• Optmized visor form: Completely new design, specially shaped for optimum sealing, minimized optical distortions
• Shell in AIM: Ogranic and multi-composite fibres in various layers for a shock-absorbent shell with optimum rigidity. 
• EPS liner system with two densities: Optimized protection through EPS elements with different shock absorbing levels
• Mist-retardant CNS-3 Pinlock system: Fast and easy to change
• Stainless steel micro Ratchet system: Easy to use and always perfectly adjusted
• 360 Degree stainless steel Pivot locking system: For safe locking of the face cover
• Double homologation P/J: Homologated as Jet and Integral helmet
• QSV-1 Sun Visor: DIN EN1836 approved
• 3D detachable and washable Cheek pads and Centre pad: For better care and individual adjustment
• Detachable and washable Chinstrap cover: For ease of cleaning
• Prepared for SENA communication system installation: Developed by SENA and specifically designed for Neotec II, distributed and marketed by SENA exclusively
• Multiple venting and extraction: For optimum ventilation performance
• Inlets at upper head and chin areas: Provide maximum ventilation performance
• 2 Outlets at the rear: To Extract warm air
• Dramatically increased airflow: Through newly developed air intakes
• Integrated Spoiler: For optimized aero dynamical performance
• Integrated Vortex-Generator: Active noise cancelling 
• Newly designed chin spoiler (Aero deflector): Relaxed ride through less turbulences

• Perfect for everyday rides and long journeys
• Comfortable Fit
• Shell in AIM +
• EPS Liner system with 2 densities
• Mist Retardant CW-1 Pinlock Visor
• Double D Ring
• Detachable chin straps and cheek pads for easier cleaning
• Air inlet vents on upper head and chin
• 2 outlet vents on the back of the helmet